|
|
|
|
|
|
to the Heat Treating Industry"
Our Multi-blade "squirrel cage" type "M" fans are usually specified for large volumes of flow against low to medium static pressures. There are several variations used for blade configurations: radial blades, backwardly inclined blades and forward curved blades. We use the forward curved blades as they deliver the same volume of air, at reduced RPM, than the other variations. The reduced RPM is important as this yields lower stresses in the wheel allowing higher temperatures to be used for the air volume specified. This series of fans has been developed and refined over the lifetime of our company and is suitable for continuous heavy duty applications involving high temperatures with capabilities up to 1780 degrees Fahrenheit. we offer the Multi-blade in many configurations of housing fans and cartridges which match your requirements. The Multi-blade fan is the most common type used in the heat treating industry, however if there is dust in the air stream that could build up, our Radial Blade Fan should be used. |
Questions or comments regarding this web site? Visit our
feedback page.
|
